Metal Effects Blue Patina
The timeless look of oxidized metal finishes
PRODUCT LINE
Clear Base
Acrylic/Polyurethane Clear Bases (CFEXU)

Our 2-component Clear Bases are currently available in 3 sheens (Matte, Satin and Gloss) and when cross-linked with our Activator they exhibit outstanding protection for previously painted surfaces in the harshest of environments.  Mixing ratio is: 3 parts Clear to 1 part Activator.  Total control of the application, open-time, and cure rate can be achieved by using our Accelerator, Brush & Roll Additive and Reducer.

Use with: Colorants, Activator, Accelerator, Brush & Roll Additive and Reducer

Sizes Available:
  • 96 oz Short-Fill Gallon
Matte Metallic Paints
Metallic Paint Collection - Matte Sheen (MM)

Formulated with the same shimmering particles and ease of application as our original "Satin Sheen" Metallic Paints but with a Matte finish. Besides the Matte finish, the do exhibit some unique qualities versus their counterparts, like holding the pattern created by stiff brushes or paint pads. Watch our video, Modern Masters Minute on Tone-on-Tone Metallic Paint finishes for more ideas.

Use with: Metallic Paint Primer

Sizes Available:
  • 6 oz
  • Quart
  • Gallon
Coverage: 320-400 sq. ft./gallon
metallic primer
Metallic Paint Primer (EM)

Metallic Paint Primer is an ideal primer and foundation color for Metallic Paints. This unique, interior/exterior acrylic primer contains zero VOC and zero Hazardous Air Pollutants. It promotes adhesion on smooth surfaces, dries fast and is immediately sandable when dry. It also provides excellent stain-blocking power and tolerates pH levels up to 13. Available in a Cool Tone and Warm Tone for use under our Metallic Paints.

Use with: Metallic Paint Collection (Satin & Matte), Exterior Metallic Paints, Metallic Plasters and Shimmerstone.

Sizes Available:
  • Quart
  • Gallon
Coverage: 350-450 sq. ft./gallon
primer
Metal Effects Primer (AM203)

A unique water base, acrylic primer designed to block Patina Aging Solutions & Rust Activator from reaching the metal or wood surface chosen as a substrate. Other primers cannot be used because they allow the Patina Aging Solutions & Activators to penetrate through to the substrate.This will disrupt the desired patina color and damage the finish by bringing rust or tannic acids to the surface.

Use with: Metal Effects Oxidizing Paints

Sizes Available:
  • 4 oz.
  • Pint
  • Gallon
Coverage: 320 sq. ft./gallon
mp gallon
Metallic Plaster (PSMP)

A pre-colored, trowel applied, architectural coating that emits a symphonic blend of shimmer, luster, elegance and environmental friendliness. Metallic Plaster is mixed and color matched in our factory for consistent project results and available in 25 standard colors. It is durable, water resistant, mold & mildew resistant and will adhere to any primed surface. This lightweight water base coating applies easily and can be used to create a wide variety of decorative finishes.

Sizes Available:
  • Gallon
ss base
ShimmerStone Tintable Base (SS1000/SS1001)

ShimmerStone® is durable, water resistant, mold & mildew resistant and will adhere to any primed surface. The lightweight coating applies easily and can be used to create a wide variety of shimmering decorative finishes. It does not lift when used with Modellos™, stencils with adhesive sprays or painter’s tape, making it perfect for multilayer finishes. The Tint Base can be used untinted or custom tinted using small amounts of Platinum Series colorants or other water base colorants.

Sizes Available:
  • Quart
  • Gallon
(containers are short-filled to allow for tint and easy mixing) Coverage: 90-140 sq. ft./gallon
matte
Matte (MCS901)

  • Gloss Measured 10-20 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
acrylic
JWR Artist's Acrylics

JWR Artist's Acrylics contain 100% acrylic binders for flexibility and durability, with concentrated, lightfast rated pigments for color longevity.  Their creamy, easy to brush consistency allows for easy dilution in water for water color techniques and airbrushing.  They dry to a flexible, water resistant, non-yellowing film with a consistent matte finish.  Conforms to ASTM D4236.

Sizes Available:
  • Gallon
Coverage: 320 sq. ft./gallon
art gel medium
Art Gel Medium (Gloss 151 & Matte 152)

Manufactured with our exclusive vacuum process which eliminates air bubbles and promotes a smooth and extended application. This heavy-bodied, transparent, gloss or matte Art Gel Medium is used to extend our acrylic colors for producing textures, glazes, etc. on canvas, paper and other flexible surfaces. It dries clear and is non-yellowing, so it is perfect for color print enhancing and texturing flat canvas art. 

Sizes Available:
  • Gallon
Coverage: 180 sq. ft./gallon
texture paste
Texture Paste Light - SHV

Texture Paste Light SHV (Super High Viscosity) is a lightweight, flexible, non-mud cracking alternative to Modeling Paste, when flexibility and weight are a factor. Its unique properties make it perfect for texturing everything from paintable wall-coverings to fine art. Texture Paste Light can be mixed with any of our acrylic paints and mediums, and it weighs in at an incredibly low 4 lbs/gallon. 

Sizes Available:
  • 2-Gallon Pail
Coverage: 180 sq. ft./gallon