metallic paint
Get creative with shimmering plasters
PRODUCT LINE
Clear Base
Acrylic/Polyurethane Clear Bases (CFEXU)

Our 2-component Clear Bases are currently available in 3 sheens (Matte, Satin and Gloss) and when cross-linked with our Activator they exhibit outstanding protection for previously painted surfaces in the harshest of environments.  Mixing ratio is: 3 parts Clear to 1 part Activator.  Total control of the application, open-time, and cure rate can be achieved by using our Accelerator, Brush & Roll Additive and Reducer.

Use with: Colorants, Activator, Accelerator, Brush & Roll Additive and Reducer

Sizes Available:
  • 96 oz Short-Fill Gallon
master clear
MasterClear® Protective Clear Topcoats (Satin ME664; Semi-Gloss ME662)

MasterClear interior/exterior topcoat is a water base, one part, self-crosslinking, aliphatic polyurethane/acrylic, non-yellowing topcoat. MasterClear is formulated with UV absorbers, UV inhibitors, mar and slip aids, to create the best possible protection for Metallic Paint Collection Satin paints without affecting the metallic shimmer. The inherent high abrasion resistance of MasterClear also extends the service life of Metallic Paints on high-traffic interior surfaces and exceeds 3,000 scrub cycles.

Use with: Metallic Paint Collection Satin Sheen

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq. ft./gallon
xtreme
Permacoat Xtreme (AM204)

Permacoat Xtreme is a water base, clear, protective sealer and topcoat designed to work over Metal Effects Rust Activated-Iron Paint. This innovative clear coat chemically arrests the oxidized metal finish, minimizing any further corrosion, and then self-crosslinks to create a weather resistant barrier.

Use with: Metal Effects Oxidizing Iron Paint and Rust Activator

Sizes Available:
  • 4 oz.
  • Pint
  • Gallon
Coverage: 275 sq. ft./gallon applied as directed
top coat
Protective Clear Topcoat (VP300)

This trowel applied clear protective topcoat is intended for use over Venetian Plaster finishes in high traffic areas where washability is imperative or for rooms that experience high humidity.

Sizes Available:
  • Quart
  • Gallon
Coverage: 800-1200 sq. ft./gallon
pearl topcoat
Pearl Topcoat (VP303)

This trowel applied topcoat offers the same protection as the clear topcoat while adding a decorative, translucent pearl shimmer to the Venetian Plaster finish.

Sizes Available:
  • Quart
Coverage: 200-300 sq. ft./quart
Dead Flat
Exterior Dead Flat Varnish

Theme Paint Low VOC Exterior Dead Flat Varnish provides an additional level of UV and weather protection over color washes, etc. This 100% acrylic, water base, protective clear top coat is formulated with maximum levels of UV Blockers and UV Absorbers to further reduce the harmful effects of ultraviolet rays and extend the life of the finish. The clear, dead-flat finish will eliminate any undesirable sheen variations across the surface of painted projects. 

Dead Flat (measured 0-3 @85°)

Sizes Available:
  • Gallon
Coverage: 350-450 sq. ft./gallon
Invisible Clear
Invisible Clear Color (WF)

Modern Masters’ latest breakthrough in fluorescent coatings technology is Invisible Clear Color, a unique addition to the Wildfire family of brilliant, color balanced, UV activated paints. Invisible Clear Color, when applied under normal lighting conditions, over any previously painted surface, appears to be a typical, low sheen, protective clear top coat. But, when UV blacklight is applied Wildfire Invisible Clear Color comes to life with the maximum color brilliance you’ve come to expect from Wildfire! These paints cannot be mixed effectively to create custom colors, but subtle shade differences can be achieved.

Sizes Available:
  • 4 oz.
  • Quart
  • Gallon
Coverage: 200-240 sq. ft./gallon
Wildfire Sheen Leveler
Sheen Leveler (WF)

For use over Invisible Clear Colors only.  Images created with Invisible Clear Colors may be still detected in visible light due to variations in the sheen.  For example, a stenciled image over a dead flat surface.  To eliminate the variation in sheen apply Sheen Leveler over the painted image and the surrounding area.

Sizes Available:
  • 4 oz.
  • Quart
Coverage: 50-60 sq. ft./quart
matte
Matte (MCS901)

  • Gloss Measured 10-20 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
satin
Satin (MCS902)

  • Gloss Measured 25-35 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
semi
Semi-Gloss (MCS903)

  • Gloss Measured 50-60 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
gloss
Gloss (MCS904)

  • Gloss Measured 80-85 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
Wall Glaze
Wall Glazing Cream (PSWGC)

Wall Glazing Cream is a water base, slow-drying, translucent glaze, formulated for maximum “working time” with excellent durability. It is ideal for decorative wall finishes and complex faux finishes.

For best results tint with Platinum Series Colorants.

Sizes Available:
  • Quart
Coverage: 150-200 sq. ft/quart
FC Glaze
Furniture & Cabinetry Glazing Cream (PSFGC)

Furniture & Cabinetry Glazing Cream is a water base, slow-drying, translucent glaze, formulated for maximum “working time” with excellent durability. It's lower viscosity allows for a sheerer application, designed to reduce the amount of glaze required while providing more fluid patterns and advanced effects.

For best results tint with Platinum Series Colorants.

Sizes Available:
  • Quart
Coverage: 10-200 sq. ft./quart
Glass Bead Gel
Glass Bead Gel (PSGB501)

This water base transparent gel medium contains small glass beads. It can be troweled or brushed onto various surfaces in patterns or full coverage. When dry, the Glass Bead Gel is clear allowing the undertone colors from previous layers of paint and decorative finishes to reflect through, magnifying the beauty of the underlying finish. The Glass Bead Gel also gives a desired crystal like appearance to enhance any surface.

Sizes Available:
  • Gallon
Coverage: 40-65 sq. ft./gal
glaze
Tintable Glaze (DP608)

Our original translucent and durable water base glaze has a 1 hour “open time” with optimum viscosity for maintaining patterns on vertical surfaces. Ideal for any decorative paint/faux finish such as Marbling, Wood Graining, Exotic Mineral, Bone, and Overglazing. This glaze can be tinted with Platinum Series Colorants or Universal colorants.

Sizes Available:
  • Quart
Coverage: 150-200 sq. ft./quart
dead flat
Dead Flat Varnish (DP609)*

This premium quality, water base, non-yellowing Dead Flat Varnish is a clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will remove undesirable variations in sheen created by using semi-gloss base coats with Decorative Glazes and allows the finish to maintain that aged effect.

*not for sale in Southern California

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
dead flat low
Dead Flat Varnish Low VOC (DP400)

This premium quality, water base, non-yellowing Dead Flat Varnish is a low VOC, clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will remove undesirable variations in sheen created by using semi-gloss base coats with Decorative Glazes and allows the finish to maintain that aged effect.

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
ex dead flat
Exterior Dead Flat Varnish (DP612)*

This premium quality, water base, UV protective Dead Flat Varnish is a clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will protect exterior finishes, murals, etc. while maintaining an aged effect.

*not for sale in Southern California

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
ex dead flat low
Exterior Dead Flat Varnish Low VOC (DP401)

This premium quality, water base, UV protective Dead Flat Varnish is a low VOC clear finish coat formulated to have the optimum level of clarity with the least amount of sheen.  It will protect exterior finishes, murals, etc. while maintaining an aged effect.

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
art gel medium
Art Gel Medium (Gloss 151 & Matte 152)

Manufactured with our exclusive vacuum process which eliminates air bubbles and promotes a smooth and extended application. This heavy-bodied, transparent, gloss or matte Art Gel Medium is used to extend our acrylic colors for producing textures, glazes, etc. on canvas, paper and other flexible surfaces. It dries clear and is non-yellowing, so it is perfect for color print enhancing and texturing flat canvas art. 

Sizes Available:
  • Gallon
Coverage: 180 sq. ft./gallon