FDP
Never Fades guaranteed!
PRODUCT LINE
Tintable Gallons

The Colorfast EX high performance two-component aliphatic acrylic polyurethane topcoat is specially formulated with ingredients that are resistant to UV degradation. Use the Colorfast EX wherever an extremely durable, corrosion, chemical and abrasion resistant finish is desired and where excellent color and gloss retention is a must, regardless of your color selection. 

Sizes Available:
  • Short-Fill Gallon
Epoxy Primer

The Colorfast EX high performance two-component high solids epoxy primer is specifically designed for application directly to sound rusted steel, clean steel, galvanized metal, concrete, previously coated surfaces and slightly damp surfaces. This primer contains <100 g/L VOC and can be used inside or outside (must be topcoated when used outside). The Colorfast EX epoxy primer comes in either gray or white.

Sizes Available:
  • Short-Fill Gallon
Acrylic/Polyurethane Clear Bases (CFEXU)

Our 2-component Clear Bases are currently available in 3 sheens (Matte, Satin and Gloss) and when cross-linked with our Activator they exhibit outstanding protection for previously painted surfaces in the harshest of environments.  Mixing ratio is: 3 parts Clear to 1 part Activator.  Total control of the application, open-time, and cure rate can be achieved by using our Accelerator, Brush & Roll Additive and Reducer.

Use with: Colorants, Activator, Accelerator, Brush & Roll Additive and Reducer

Sizes Available:
  • 96 oz Short-Fill Gallon
Acrylic/Polyurethane Pre-Colored Silver

Sizes Available:
  • 96 oz Short-Fill Gallon
matte
Matte (MCS901)

  • Gloss Measured 10-20 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
satin
Satin (MCS902)

  • Gloss Measured 25-35 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
semi
Semi-Gloss (MCS903)

  • Gloss Measured 50-60 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
gloss
Gloss (MCS904)

  • Gloss Measured 80-85 @ 60°
  • For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
  • For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq ft./gallon
xtreme
Permacoat Xtreme (AM204)

Permacoat Xtreme is a water base, clear, protective sealer and topcoat designed to work over Metal Effects Rust Activated-Iron Paint. This innovative clear coat chemically arrests the oxidized metal finish, minimizing any further corrosion, and then self-crosslinks to create a weather resistant barrier.

Use with: Metal Effects Oxidizing Iron Paint and Rust Activator

Sizes Available:
  • 4 oz.
  • Pint
  • Gallon
Coverage: 275 sq. ft./gallon applied as directed
master clear
MasterClear® Protective Clear Topcoats (Satin ME664; Semi-Gloss ME662)

MasterClear interior/exterior topcoat is a water base, one part, self-crosslinking, aliphatic polyurethane/acrylic, non-yellowing topcoat. MasterClear is formulated with UV absorbers, UV inhibitors, mar and slip aids, to create the best possible protection for Metallic Paint Collection Satin paints without affecting the metallic shimmer. The inherent high abrasion resistance of MasterClear also extends the service life of Metallic Paints on high-traffic interior surfaces and exceeds 3,000 scrub cycles.

Use with: Metallic Paint Collection Satin Sheen

Sizes Available:
  • Quart
  • Gallon
Coverage: 320-400 sq. ft./gallon
FDP
Perfect for shutters and back doors too!

  • Colors were carefully selected utilizing the latest in color trends and home design from around the world
  • Never-Fade technology ensures that your door will be as vibrant as the first day it was painted
  • Two-coat application, quick-dry formula and satin finish allows you to paint and close your door the same day

Sizes Available:
  • Quart
Coverage: 80-100 sq. ft.
Tintable Glaze (DP608)

Our original translucent and durable water base glaze has a 1 hour “open time” with optimum viscosity for maintaining patterns on vertical surfaces. Ideal for any decorative paint/faux finish such as Marbling, Wood Graining, Exotic Mineral, Bone, and Overglazing. This glaze can be tinted with Platinum Series Colorants or Universal colorants.

Sizes Available:
  • Quart
Coverage: 150-200 sq. ft./quart
dead flat
Dead Flat Varnish (DP609)*

This premium quality, water base, non-yellowing Dead Flat Varnish is a clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will remove undesirable variations in sheen created by using semi-gloss base coats with Decorative Glazes and allows the finish to maintain that aged effect.

*not for sale in Southern California

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
dead flat low
Dead Flat Varnish Low VOC (DP400)

This premium quality, water base, non-yellowing Dead Flat Varnish is a low VOC, clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will remove undesirable variations in sheen created by using semi-gloss base coats with Decorative Glazes and allows the finish to maintain that aged effect.

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
ex dead flat
Exterior Dead Flat Varnish (DP612)*

This premium quality, water base, UV protective Dead Flat Varnish is a clear finish coat formulated to have the optimum level of clarity with the least amount of sheen. It will protect exterior finishes, murals, etc. while maintaining an aged effect.

*not for sale in Southern California

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon
ex dead flat low
Exterior Dead Flat Varnish Low VOC (DP401)

This premium quality, water base, UV protective Dead Flat Varnish is a low VOC clear finish coat formulated to have the optimum level of clarity with the least amount of sheen.  It will protect exterior finishes, murals, etc. while maintaining an aged effect.

Sizes Available:
  • Gallon
  • Quart
Coverage: 350-450 sq. ft./gallon